Tile and Stone Cleaning Melbourne and Sealing
Even then, to maintain this appeal, tiles require regular
cleaning with appropriate methods and chemicals. Thus, it is advisable that you
avoid using chemicals on your tiles without professional guidance. Tile
cleaning and sealing is not an easy task especially if a vast area of your
floor is tiled. In fact, this may call for the use of a machine or enlisting
the services of residential cleaning services in your area. These companies are
usually equipped and have cleaners who understand the procedures involved in
restoring the beauty of your tiles.
Although tile and Stone Cleaning Melbourne is a great investment, it can be quite costly.
Therefore, tile and stone sealing is recommended especially if your surfaces
have seen better days or they just get dirty often. A tile and stone sealer
will protect your surfaces from general dirt as well as spills. Moreover, with
sealers it is more easy to sweep and difficult to stain.
Sealers come in two varieties; topical sealers and
penetrating sealers. There are also combo sealers comprising both penetrating
and topical sealers. If you are going to apply sealers to your tiles or stones,
here are some important factors to keep in mind for better results:
·
Ensure that the
target floor is clean - Be sure to use the right cleaner. That is, be sure the
cleaner is meant for tile/stone use to avoid damaging the surface. The use of
the wrong cleaner can be a costly oversight. You also need to be keen on
following the manufacturer's instructions on the dosage as this varies from one
manufacturer to the other. Always use a soft brush when cleaning counter tops,
walls and the floor. Most importantly, refrain from covering a big area at once
so that it does not dry up before you finish and rinse.
·
Watch out for
stained areas - If you notice any stains after cleaning the surfaces, you can
soak the affected area for a while before cleaning it out. If need be repeat
this process until you achieve the desired results.
·
·Apply the sealer -
Once you are through with cleaning, you can give your floor up to 4 hours
before applying the sealer. In most cases, the sealer can be poured on a large
tray from where it will be applied on the floor. It is advisable to start from
the furthest point advancing towards those areas that are close to you. The
application process must be even so that there are no puddles left behind.
In summary, proper care and maintenance of tile and stone
floors may require professional cleaning and sealing services that will not
only ensure longevity but also help maintain aesthetic value of the floor.
H2O
pressure cleaning specializes in stone cleaning and other different
services such as Paint Removal Melbourne,
Pre-cast Panel Cleaning Melbourne, render facades and tuck pointed homes etc.
For more details contact at 0419 392 575 or visit
@www.h2opressurecleaning.com.au.
Comments
Post a Comment